What Is EDID? Meaning, Monitor Serial and HWID
Learn what EDID is, how monitor serial numbers work, and whether anti-cheat systems use display data for hardware identification and HWID bans.
By SensePublished
What Does EDID Stand For?
EDID stands for Extended Display Identification Data. It is a standardized data structure that monitors, TVs, and other display devices use to describe their capabilities to the computer they are connected to. When you plug a monitor into your GPU via HDMI, DisplayPort, or DVI, the graphics driver reads the monitor's EDID to determine the supported resolutions, refresh rates, color depth, and physical characteristics of the display.
The EDID standard is maintained by VESA (Video Electronics Standards Association) and has evolved through several versions:
- EDID 1.0–1.4: The base standard. A 128-byte block covering basic display parameters.
- E-EDID (Enhanced EDID): Adds extension blocks for additional capabilities. Each extension is another 128 bytes.
- DisplayID: The newer replacement, more flexible and supporting higher resolutions and modern display features.
Most monitors in use today report EDID 1.3 or 1.4, often with a CEA-861 extension block for audio and advanced video timings.
What Information Does EDID Contain?
The 128-byte base EDID block packs a surprising amount of information:
Manufacturer and Product Identification
- Manufacturer ID: A 3-letter code derived from the EISA (now PNP) manufacturer registry. For example,
DELfor Dell,SAMfor Samsung,ACRfor Acer,AUSfor ASUS. - Product Code: A 16-bit identifier for the specific model. Combined with the manufacturer ID, this uniquely identifies the monitor model.
- Serial Number: A 32-bit integer serial number. This is the numeric serial, not the human-readable one.
- Week and Year of Manufacture: The production week (1–54) and year.
Display Parameters
- Video Input Definition: Whether the display accepts analog or digital signals, and which type.
- Screen Size: Physical dimensions in centimeters.
- Gamma: The display's native gamma value.
- Supported Features: DPMS (power management), display type (RGB, non-RGB), and sRGB support.
Timing Information
- Established Timings: A bitmap of commonly supported resolutions (720x400, 640x480, 800x600, 1024x768, etc.).
- Standard Timings: Up to 8 additional resolution/refresh rate combinations.
- Detailed Timing Descriptors: Up to 4 detailed mode descriptions including pixel clock, active area, blanking, and sync information.
Descriptor Blocks
The four 18-byte descriptor blocks can contain detailed timings or text descriptors:
- Monitor Name: Up to 13 ASCII characters (e.g., "DELL U2723QE").
- Monitor Serial Number String: Up to 13 ASCII characters. This is the human-readable serial, separate from the 32-bit numeric serial in the header.
- Monitor Range Limits: Minimum and maximum horizontal and vertical frequencies, maximum pixel clock.
How to Read Your Monitor's EDID
Windows: Registry
Windows stores EDID data for each connected display in the registry:
HKLM\SYSTEM\CurrentControlSet\Enum\DISPLAY\<MonitorID>\<InstanceID>\Device Parameters\EDIDYou can read it with PowerShell:
Get-ChildItem "HKLM:\SYSTEM\CurrentControlSet\Enum\DISPLAY" -Recurse |
Where-Object { $_.GetValueNames() -contains 'EDID' } |
ForEach-Object {
$edid = $_.GetValue('EDID')
[PSCustomObject]@{
Path = $_.Name
EDIDLength = $edid.Length
RawHex = ($edid | ForEach-Object { '{0:X2}' -f $_ }) -join ' '
}
}This returns the raw EDID bytes, which you can decode manually or with a tool.
Windows: CCD API
The modern approach uses the Configuration Display (CCD) API. The DisplayConfigGetDeviceInfo function with DISPLAYCONFIG_DEVICE_INFO_GET_TARGET_NAME returns the monitor name, manufacturer, and product code parsed from EDID.
Third-Party Tools
Several free utilities decode EDID into readable form:
- Monitor Asset Manager: Reads EDID from connected displays and parses every field.
- Custom Resolution Utility (CRU): Shows and lets you edit EDID data.
- AW EDID Editor: Professional EDID editing tool.
- HWiNFO: Displays monitor EDID information in its sensor and system summary.
Linux
On Linux, you can read raw EDID from the DRM subsystem:
cat /sys/class/drm/card0-HDMI-A-1/edid | edid-decodeThe edid-decode utility parses the binary EDID into human-readable output.
The Monitor Serial Number
EDID contains two different serial numbers:
Numeric Serial (bytes 12–15): A 32-bit little-endian integer in the EDID header. Some manufacturers use this as a true per-unit serial, while others set it to 0 or a model-level constant.
Serial Number String (descriptor block): A text string of up to 13 characters stored in one of the four descriptor blocks. This is the serial number printed on the monitor's label.
Not all monitors populate both fields. Budget monitors frequently set the numeric serial to 0 and omit the string serial entirely. High-end monitors from Dell, LG, ASUS, and Samsung typically populate both.
The serial number in EDID is per-unit unique on monitors that populate it. If you have two identical Dell monitors, they will have different serial strings in their EDID. This makes the monitor serial a potentially useful hardware identifier.
Does EDID Matter for HWID Bans?
This is where things get nuanced. The short answer is: most anti-cheats do not heavily weight monitor EDID in their hardware fingerprints, but some do collect it.
Here is why:
Arguments For Anti-Cheats Using EDID
- Monitor serials are unique per unit, providing another distinguishing data point.
- EDID is persistent — the monitor stores it in its own firmware, and it does not change with OS reinstalls or driver updates.
- Reading EDID is easy through the Windows registry or the CCD API.
- Players rarely think to spoof monitor data, making it a reliable identifier.
Arguments Against Relying on EDID
- Players change monitors. Using a different monitor or adding/removing a display is normal behavior, not an evasion attempt.
- Multi-monitor setups are common. The EDID fingerprint changes whenever a display is connected or disconnected.
- HDMI switches, KVM switches, and docking stations can modify or block EDID data.
- Some monitors report identical EDID for all units of the same model (numeric serial = 0, no string serial).
- Virtual display adapters and headless GPU configurations report no EDID at all.
What Anti-Cheats Actually Do
Most major anti-cheats (Vanguard, EAC, BattlEye) focus their HWID fingerprints on components that are more stable and harder to change: disk serials, motherboard serial, system UUID, MAC addresses, and GPU identifiers. Monitor EDID may be collected as supplementary data but is unlikely to be a primary ban criterion.
That said, some anti-cheats do read display information. Vanguard, being kernel-level, has access to every hardware enumeration path including display devices. Whether it actively uses monitor serials in ban decisions or merely logs them for analytics is not publicly documented.
The risk is not zero. If an anti-cheat collects your monitor serial as part of a broad fingerprint, and you spoof every other identifier but leave monitor data untouched, that unchanged data point could theoretically contribute to re-identification. In practice, this is unlikely to be the sole factor, but it adds to the overall fingerprint.
EDID Spoofing and Overriding
Because EDID data comes from the monitor itself, changing it requires either modifying the monitor's firmware or intercepting the data between the monitor and the operating system.
Software EDID Overrides
Windows supports EDID overrides through the registry. You can place a custom EDID binary at:
HKLM\SYSTEM\CurrentControlSet\Enum\DISPLAY\<MonitorID>\<InstanceID>\Device Parameters\EDID_OVERRIDEWhen this value exists, Windows uses it instead of the EDID read from the monitor. This is a documented Microsoft feature intended for display testing and compatibility.
Custom Resolution Utility (CRU) provides a GUI for editing EDID overrides. You can change resolutions, refresh rates, and identification strings including the serial number.
However, kernel-level anti-cheats can read the actual EDID from the GPU driver rather than the registry cache, potentially bypassing the override.
Monitor Firmware Modification
Some monitor controllers allow firmware updates that can modify the EDID stored in the display's EEPROM. This is uncommon for consumer use and risks damaging the monitor.
Comprehensive HWID Spoofing
Tools like Sense AC that perform full HWID spoofing typically include display identifier handling as part of their comprehensive approach. By intercepting all hardware enumeration paths, including display device queries, the spoofer ensures that even supplementary identifiers like monitor information are presented consistently with the spoofed identity.
EDID Problems and Troubleshooting
EDID issues affect more than just anti-cheat contexts. Common problems include:
Monitor Not Detected at Native Resolution
If your monitor is stuck at a lower resolution, the EDID may not be reaching the GPU correctly. This happens with long cables, cheap adapters, or daisy-chained connections. A forced EDID override in the registry can solve this.
"Generic PnP Monitor" in Device Manager
This means Windows could not read a valid EDID from the display. Check the cable connection, try a different port, or use a different cable. DisplayPort and HDMI cables that do not support the full bandwidth may fail to transmit EDID reliably.
Flickering or Blank Screen After Wake
Some monitors re-send EDID when waking from sleep, and the GPU may interpret the new EDID handshake as a display change. An EDID override can prevent this by providing a static EDID that the GPU uses regardless of the monitor's signaling.
Incorrect Color Space or HDR
The CEA-861 extension block in EDID declares HDR capability, color gamut, and colorimetry support. If this data is wrong, Windows may apply incorrect color settings. EDID editing tools can correct these declarations.
EDID and Multiple Monitors
Each connected display has its own EDID stored separately in the registry. The GPU reads EDID from each connected port independently. This means:
- Your primary monitor's EDID is separate from your secondary's.
- Disconnecting a monitor removes its EDID from the active display enumeration.
- Windows remembers previously connected monitors in the registry even after disconnection.
For anti-cheat purposes, the set of connected displays and their EDIDs form a display profile. Changing this profile (using a different monitor, different port, different arrangement) is normal behavior that anti-cheats generally tolerate. It is the persistent identifiers — disk serial, motherboard serial, UUID — that anchor the HWID fingerprint.
Summary
EDID is the data structure monitors use to describe themselves to your computer. It contains manufacturer information, supported resolutions, and optionally a per-unit serial number. While anti-cheats may collect display information as part of a broader hardware profile, monitor EDID is generally not a primary factor in HWID bans. The identifiers that matter most — disk serials, motherboard serial, system UUID, and MAC addresses — are more persistent and more reliably unique. Still, for a thorough HWID reset, comprehensive tools like Sense AC address display identifiers alongside all other hardware fingerprint components to ensure a clean, consistent identity.