How to Change HWID: What You Can and Cannot Change
Which hardware IDs can you change yourself and which need a spoofer? A complete guide to changing your HWID on Windows, covering every component anti-cheats check.
By SensePublished
What HWID Actually Means
HWID stands for Hardware Identifier. It is not a single number. When people talk about "your HWID," they are actually referring to a collection of serial numbers, UUIDs, and identifiers that together create a unique fingerprint of your PC. Anti-cheat software reads these values through Windows APIs, WMI queries, and direct driver calls, then combines them into a profile that identifies your machine.
The identifiers that anti-cheats typically collect include your disk drive serial numbers, motherboard serial, SMBIOS UUID, BIOS serial, CPU identifier, GPU serial, MAC addresses, RAM serial numbers, monitor EDID data, TPM endorsement keys, and volume serial numbers. Some systems check only a handful of these. Others, like Riot's Vanguard, are known to build comprehensive profiles from as many sources as possible.
Understanding which of these you can change, how, and at what cost is essential if you are dealing with a hardware ban.
The Two Categories: Software-Changeable vs. Firmware-Locked
Hardware identifiers fall into two broad categories based on how they are stored and accessed.
Software-changeable identifiers are stored in the operating system, in the Windows registry, or in locations that can be modified without altering the hardware itself. These include volume serial numbers, MAC addresses, the Machine GUID, and some registry-stored values. You can change these with built-in Windows tools or simple scripts.
Firmware-locked identifiers are stored in the hardware's own firmware or burned into the chip during manufacturing. These include disk drive serial numbers (stored in the drive's firmware), SMBIOS data (stored in the motherboard's flash memory), the TPM Endorsement Key (burned into the TPM chip), and GPU identifiers (stored in the graphics card's VBIOS). Changing these requires either specialized firmware tools (risky and often irreversible) or a driver-level spoofer that intercepts the queries.
Anti-cheat software knows this distinction. A system that only checks software-changeable values is easy to defeat. Modern anti-cheats deliberately target firmware-locked identifiers because they are resistant to casual manipulation.
What You Can Change Yourself
Let us walk through each identifier category and what is realistically within your control.
Volume Serial Number
The volume serial number is a 32-bit identifier assigned to a disk partition when it is formatted. It is stored in the partition's boot sector and can be changed without reformatting.
Windows assigns a new volume serial automatically if you format the drive. You can also change it manually using tools like VolumeID from Microsoft's Sysinternals suite. The command is straightforward: run the tool with the drive letter and desired serial number, then reboot.
This is one of the easiest identifiers to change, but it is also one of the least significant. Anti-cheats that rely on volume serials alone are outdated. Most modern systems treat the volume serial as a supplementary data point.
MAC Address
As discussed in detail in our MAC address guide, the MAC address of your network adapter can be changed through Device Manager, the Windows registry, or PowerShell commands. The change is immediate after disabling and re-enabling the adapter.
However, some anti-cheats query the permanent MAC address stored in the adapter's firmware rather than the software-reported value. A registry-level MAC change will not fool these implementations.
Machine GUID
The Machine GUID is a unique identifier stored in the Windows registry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography. It is generated when Windows is installed and remains constant unless manually changed.
You can edit this registry value directly, but doing so can break Windows activation, some DRM systems, and applications that use the Machine GUID for licensing. A fresh Windows installation generates a new Machine GUID automatically, which is a safer approach if you need to change it.
Windows Product ID
Stored in the registry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion, the ProductId value is another identifier some anti-cheats collect. Reinstalling Windows generates a new one, but editing it manually can cause activation issues.
Hostname and Username
Your computer name and user account name are trivial to change through Windows Settings. While some anti-cheats log these as part of their fingerprint, they are never the primary identifier and changing them alone will not bypass a ban.
What Requires a Fresh Windows Install
A clean Windows installation on a freshly formatted drive changes several identifiers at once:
- New volume serial numbers for all partitions
- New Machine GUID
- New Windows Product ID
- New computer SID (Security Identifier)
- New hostname and user profiles
- Cleared registry entries that anti-cheats may have stored
A fresh install is often recommended as a first step after a ban, not because it changes your HWID (it does not touch firmware identifiers), but because it clears cached anti-cheat data and software-level fingerprints. However, if the ban is based on firmware-level hardware identifiers, a Windows reinstall alone will not help.
What You Cannot Change Without Hardware Replacement
These identifiers are stored in hardware firmware and cannot be altered through normal operating system tools.
Disk Drive Serial Number
Every hard drive and SSD has a serial number stored in its firmware. This is different from the volume serial number discussed above. The drive serial is set at the factory and persists through formatting, partitioning, and operating system changes.
WMI exposes it through the Win32_DiskDrive class, and anti-cheats commonly query it. The only way to change it without a spoofer is to physically replace the drive. Some older tools claimed to flash new serials onto certain drive models, but this is unreliable, model-specific, and can brick the drive.
SMBIOS UUID and Motherboard Serial
The System Management BIOS stores your motherboard's serial number, manufacturer, model, and a UUID that is supposed to be unique to the system. This data lives in the motherboard's flash memory and is read through the SMBIOS/DMI interface.
Some BIOS modding tools can alter SMBIOS data, but this requires flashing a modified BIOS, which carries real risk. A bad flash can render your motherboard unbootable. Modifying SMBIOS values may also void your warranty and trigger Secure Boot violations.
Replacing the motherboard gives you new SMBIOS data, but that is an expensive and disruptive change.
BIOS Serial Number
Closely related to the SMBIOS data, the BIOS serial is stored in the BIOS firmware itself. It identifies the BIOS installation and is read by anti-cheats through WMI or direct SMBIOS table parsing. Like the motherboard serial, changing it requires a BIOS flash with modified firmware.
CPU Identifier
Your CPU has a processor ID and other identifying information that can be read through the CPUID instruction. While the processor ID is not truly unique across all CPUs of the same model, anti-cheats use it in combination with other data. The only way to change it is to replace the CPU.
GPU Identifier
Graphics cards store identifiers in their VBIOS, including device IDs and sometimes serial numbers. These can be read through DirectX, the graphics driver, or PCI enumeration. Flashing a modified VBIOS is theoretically possible but risky and model-specific.
TPM Endorsement Key
The TPM's Endorsement Key is the most locked-down identifier on a modern PC. It is generated during manufacturing and stored in non-volatile memory inside the TPM chip. It cannot be changed, erased, or overridden. The only way to get a different EK is to replace the TPM module, and on systems using firmware TPM built into the CPU, that means replacing the processor.
Monitor EDID
Your monitor broadcasts its Extended Display Identification Data over the display cable. EDID includes the manufacturer, model, serial number, and supported resolutions. Anti-cheats can read this through the display driver. Changing EDID requires either a different monitor or a hardware EDID emulator.
What a Spoofer Actually Does
An HWID spoofer sits between the anti-cheat and the hardware, intercepting identification queries and returning altered values. Instead of changing the actual firmware, which is risky or impossible, a spoofer hooks into the system calls and driver-level interfaces that anti-cheats use to read hardware data.
A well-built spoofer handles:
- WMI queries: Intercepts calls to
Win32_DiskDrive,Win32_BIOS,Win32_BaseBoard, and other classes - SMBIOS table reads: Provides modified data when the anti-cheat parses raw SMBIOS tables from memory
- Direct driver calls: Hooks into disk, network, and other device drivers to alter serial numbers returned through IOCTLs
- Registry reads: Modifies values in the
HARDWAREhive and other locations that anti-cheats query - TPM interface: Intercepts calls to the TPM Base Services to mask the Endorsement Key
The key advantage of a spoofer is that it changes what the anti-cheat sees without modifying the actual hardware. Your real identifiers remain intact for everything else on your system, while the anti-cheat receives a consistent set of spoofed values.
Sense AC operates at this level, providing driver-level interception across all the query paths that modern anti-cheats use. This approach is necessary because anti-cheats like Vanguard, BattlEye, and EAC use multiple overlapping methods to read the same identifier, and a spoofer must catch all of them to present a consistent alternate identity.
The Replacement Approach: Changing Physical Hardware
If you prefer not to use a spoofer, the nuclear option is replacing the hardware that contributes to your banned fingerprint. The minimum set of replacements typically needed depends on the anti-cheat:
For most BattlEye and EAC games: A new disk drive is often sufficient, combined with a fresh Windows install. These systems historically focused on disk serials and SMBIOS data.
For Vanguard (Valorant, League): You likely need a new motherboard and disk at minimum, and if the system uses firmware TPM, potentially a new CPU as well. Vanguard's fingerprinting is the most comprehensive in the industry.
For FiveM servers: It varies wildly by server. Some only check MAC and IP, which are easy to change. Others use comprehensive anti-cheats that rival the major publishers.
Replacing hardware is expensive and wasteful. A modern gaming motherboard costs anywhere from $100 to $400, and there is no guarantee that you have replaced every component the anti-cheat checks. This is why most players opt for a software solution.
Common Mistakes When Trying to Change HWID
Several approaches that people commonly try are either ineffective or actively harmful:
Using a VM: Virtual machines present virtual hardware identifiers, but most anti-cheats detect VMs and refuse to run inside them. Vanguard, BattlEye, and EAC all block known VM environments.
Editing only the registry: Many hardware identifiers have both a registry entry and a firmware source. Anti-cheats that read from firmware will ignore your registry edits.
Changing one identifier at a time: If the anti-cheat uses a composite fingerprint, changing one component while leaving the rest may not be enough. Worse, it can create an inconsistent profile that flags you as suspicious even on a supposedly clean account.
Flashing firmware: Modifying drive firmware, BIOS, or VBIOS carries real risk of bricking hardware. The process is often model-specific, poorly documented, and irreversible if something goes wrong.
Reinstalling Windows without changing anything else: A fresh OS install changes software identifiers but leaves all firmware identifiers untouched. If the ban is hardware-level, you will be re-detected immediately.
The Right Approach
If you are dealing with a hardware ban, the realistic options are:
Replace the specific hardware components that contribute to the ban. This requires knowing which identifiers the anti-cheat checks, which is not always public information.
Use a comprehensive HWID spoofer like Sense that intercepts all hardware queries at the driver level. This is less expensive than replacing hardware, does not risk bricking anything, and covers identifiers you might not know the anti-cheat is checking.
Combine a fresh Windows install with a spoofer for the best results. The clean install eliminates cached anti-cheat data and software fingerprints, while the spoofer handles the firmware identifiers you cannot change through the OS.
The method you choose depends on your budget, technical comfort, and how comprehensive the anti-cheat's fingerprinting is. For games protected by Vanguard, a driver-level spoofer is essentially the only practical option short of replacing most of your PC.
Conclusion
Not all hardware identifiers are created equal. Some you can change in seconds through Windows settings. Others are locked into firmware that you cannot touch without specialized tools or hardware replacement. Modern anti-cheats deliberately target the hardest-to-change identifiers, which is why casual registry edits and format-and-reinstall approaches fail. Understanding what you can and cannot change is the first step toward an effective strategy, whether that means targeted hardware replacement or a comprehensive spoofing solution.